IB Maths AI HL flashcards: geometry and trigonometry
Free geometry and trigonometry flashcards for IB Maths Applications and Interpretation HL: 71 cards on Dot product and angles, Vector basics, Graph theory basics, Minimum spanning tree and more. Click the card to reveal the answer, then say whether you got it right; cards you miss come round again.
Log in to save your answers and pick up where you left off.
All cards
Prefer to read through the cards? Open the list to see every question and answer, with links to the matching revision section and practice questions.
Geometry and trigonometry: show all cards
-
Which formula?
Which formula gives the component of in the direction of , and what is it for and ?
. Here and , so the component is .
Revise: FormulasPractise: Dot product and angles -
Which method?
How do you find a unit vector in the direction of , and what is it?
Divide the vector by its magnitude. , so the unit vector is .
Revise: Key termsPractise: Vector basics -
Which method?
A graph has five vertices with degrees . Which result gives its number of edges?
The handshaking lemma, . The degrees sum to , so .
Revise: FormulasPractise: Graph theory basics -
True or false
True or false: a graph can have the degree sequence .
False. The degrees sum to , which is odd, but the sum of degrees equals and must be even.
Revise: FormulasPractise: Graph theory basics -
Which formula?
Which formula links the sum of the in-degrees, the sum of the out-degrees and the number of edges of a directed graph?
, because every directed edge adds to one out-degree and to one in-degree.
Revise: Key termsPractise: Graph theory basics -
Criteria
A connected graph has vertices and edges. Is it a tree?
No. A tree on vertices has exactly edges, so this graph must contain a cycle.
Revise: Key termsPractise: Graph theory basics -
True or false
True or false: if all the edge weights of a connected graph are different, its minimum spanning tree must contain the edge of least weight.
True. With all weights different the minimum spanning tree is unique, and Kruskal's algorithm always keeps the lightest edge because a single edge can never form a cycle.
Revise: Key termsPractise: Minimum spanning tree -
Spot the error
Using Kruskal's algorithm, a pupil adds an edge of weight that closes a cycle because it is the next smallest. What is the error?
Kruskal's algorithm must skip any edge that would form a cycle, however small its weight. Move on to the next smallest edge.
Revise: Key termsPractise: Minimum spanning tree -
Identify
Edges: , , , , , . Which edges does Kruskal's algorithm choose, in order, and what is the total weight?
, then , then . The tree now has edges for vertices, so it is finished, with total weight .
Revise: Key termsPractise: Minimum spanning tree -
True or false
True or false: Prim's algorithm can give different total weights for the minimum spanning tree depending on the starting vertex.
False. The starting vertex can change which edges are chosen when weights tie, but the minimum total weight is always the same.
Revise: FormulasPractise: Minimum spanning tree -
Criteria
A connected graph has vertex degrees . Does it have an Eulerian circuit or an Eulerian trail?
It has an Eulerian trail but no circuit. Exactly two vertices are odd, so a trail exists and must start and end at those two vertices.
Revise: FormulasPractise: Traversals and circuits -
Which method?
In a Chinese postman problem the only odd vertices are and . The total edge weight is and the shortest path from to is . Which method gives the length of the shortest route?
Repeat the shortest path between the two odd vertices, so add it to the total edge weight: .
Revise: FormulasPractise: Traversals and circuits -
Identify
The complete graph on vertices has every vertex of degree . Does it have an Eulerian circuit? A Hamiltonian cycle?
No Eulerian circuit, because every degree is odd. It does have a Hamiltonian cycle, visiting all four vertices once and returning.
Revise: FormulasPractise: Traversals and circuits -
Interpret
The nearest neighbour algorithm gives a tour of length for the travelling salesman problem. What does tell you about the shortest tour?
It is an upper bound: the shortest tour is at most , since a tour of length exists. It is not necessarily the optimum.
Revise: FormulasPractise: Traversals and circuits -
Which method?
Which method converts radians to degrees?
Multiply by : .
Revise: Key termsPractise: Radians, arcs and sectors -
Which formula?
Which formula gives the arc length of a sector with radius and angle radians?
.
Revise: FormulasPractise: Radians, arcs and sectors -
First step
A sector of radius has area . What is the first step to find its angle in radians?
Substitute into : . This gives radians.
Revise: FormulasPractise: Radians, arcs and sectors -
Spot the error
For a sector with and angle , a pupil uses with . What is the error, and what is the area?
must be in radians: . Then .
Revise: FormulasPractise: Radians, arcs and sectors -
Identify
Write the matrix for reflection in the -axis.
. It maps to .
Revise: Key termsPractise: Matrix transformations -
First step
What is the first step to find the image of under ?
Write the point as the column vector and multiply it on the left by the matrix: , so the image is .
Revise: FormulasPractise: Matrix transformations -
Which method?
A transformation sends to and to . Which method gives its matrix directly?
Use the two images as the columns: .
Revise: FormulasPractise: Matrix transformations -
Interpret
An enlargement with scale factor about the origin has matrix . A shape has area . What is the area of its image?
, so the image area is .
Revise: Key termsPractise: Matrix transformations -
Spot the error
Rotation is followed by reflection . A pupil gives the single matrix as . What is the error?
The first transformation must sit on the right, next to the point. The single matrix is , not .
Revise: FormulasPractise: Composite transformations -
Which formula?
Transformation is applied first, then . Which product gives the single matrix: or ?
. The matrix next to the point acts first, so the first transformation is written on the right.
Revise: FormulasPractise: Composite transformations -
Interpret
A horizontal stretch with scale factor (matrix ) is followed by an enlargement with scale factor . By what factor does the composite multiply areas?
for the stretch and for the enlargement. The composite determinant is , so areas are multiplied by .
Revise: Key termsPractise: Composite transformations -
Identify
is a rotation of anticlockwise about the origin. Find and describe the transformation it represents.
, a rotation of anticlockwise (equivalently clockwise) about the origin.
Revise: FormulasPractise: Composite transformations -
Which formula?
A sinusoidal model has maximum and minimum . Which formulas give its amplitude and principal axis?
and , so the principal axis is .
Revise: FormulasPractise: Trigonometric Models -
Which formula?
Which formula gives the period of , with in radians?
Period .
Revise: FormulasPractise: Trigonometric Models -
Identify
In , what is the phase shift?
The phase shift is : a translation of units to the right.
Revise: Key termsPractise: Trigonometric Models -
First step
is acute and . What is the first step to find and ?
Use : , so as is acute. Then .
Revise: FormulasPractise: Trigonometric Models -
Identify
Sites and share the Voronoi edge . Without working out any distances, which site is nearest to ?
. has , so it lies on the same side of the edge as , inside the cell of .
Revise: Key termsPractise: Voronoi Applications -
Interpret
In a toxic waste dump problem, why is the best location found at a Voronoi vertex or on the boundary of the region, and never inside a cell?
Inside a cell, moving directly away from its site always increases the distance to the nearest site, so no interior point is the furthest. The furthest point lies where cells meet, at a vertex equidistant from three sites, or on the boundary of the region.
Revise: FormulasPractise: Voronoi Applications -
Which method?
Sites , and have perpendicular bisectors (for ) and (for ). Which method finds the point equidistant from all three sites?
Solve the two bisector equations simultaneously: gives , so the point is . It is from each site.
Revise: FormulasPractise: Voronoi Applications -
True or false
True or false: adding a new site to a Voronoi diagram can make an existing cell larger.
False. Some points of existing cells are now nearer the new site, so existing cells can only shrink.
Revise: Key termsPractise: Voronoi Applications -
Spot the error
A pupil gives the perpendicular bisector of the sites and as . What is the error?
is the line through the two sites. The bisector passes through the midpoint with the negative reciprocal gradient : .
Revise: Key termsPractise: Voronoi Construction -
Identify
Two sites are and . What is the equation of their shared cell boundary?
The sites share the same -coordinate, so the bisector is vertical through the midpoint : .
Revise: Key termsPractise: Voronoi Construction -
True or false
True or false: for three sites that do not lie on one straight line, the three perpendicular bisectors meet at a single point.
True. That point is equidistant from all three sites, and it is the Voronoi vertex where their three cells meet.
Revise: Key termsPractise: Voronoi Construction -
Interpret
A point lies on the Voronoi edge between sites and . What is true about ?
is equidistant from and , and no other site is nearer. It lies on the perpendicular bisector of .
Revise: Key termsPractise: Voronoi Construction -
Which formula?
In triangle , , and , where is the side opposite . Using and , which sine rule equation finds , and what is exactly?
, so .
-
Identify
In triangle , which angle is opposite side , and which side is opposite angle ?
Angle is opposite side (the side labelled ). Side (labelled ) is opposite angle .
-
Spot the error
Given , and , a pupil writes . What is wrong?
The sides are the wrong way round. From , . (The pupil's value is bigger than , which is impossible for a sine.)
-
Criteria
A triangle has , and . How many triangles are possible, and how can you tell?
Two. Here , and (that is, ), so side can meet the base in two places, giving one acute and one obtuse .
-
Which formula?
In a triangle , and the angle between them is . Using , which rule finds , and what is exactly?
The cosine rule: , so .
Revise: FormulasPractise: Cosine Rule -
Which method?
A triangle has sides , and and no angles are known. Which rule do you use to find an angle, and in what form?
The cosine rule, rearranged: , where is the side opposite the angle you want. The sine rule cannot start because there is no angle-side pair.
Revise: FormulasPractise: Cosine Rule -
Interpret
A triangle has sides , and . The cosine rule gives for the angle opposite the side . Is acute or obtuse, and why is there only one possible value of ?
Obtuse, because its cosine is negative. Only one angle between and has a given cosine, so the cosine rule gives no second possibility.
Revise: Key termsPractise: Cosine Rule -
Spot the error
In triangle , , and . A pupil writes the area as . What is wrong?
The angle must be the one between the two sides used. and meet at , not , so the formula needs angle . Angle is opposite .
Revise: Key termsPractise: Area of a Triangle -
Criteria
A triangle has sides , and , and no angles are given. Can you use straight away?
No. The formula needs two sides and the angle between them. First use the cosine rule to find one angle, then substitute.
Revise: FormulasPractise: Area of a Triangle -
First step
Two sides of and enclose an acute angle , and the triangle has area . What is the first step to find ?
Write and rearrange to . (This then gives .)
Revise: Worked examplesPractise: Area of a Triangle -
Which formula?
Which formula gives the distance between and , and what is the distance?
.
Revise: Key termsPractise: 3D Geometry -
First step
is the base of a cuboid, and are the points directly above . To find the angle between the diagonal and the base, what is the first step?
Find the projection of onto the base, which is . Then use the right-angled triangle (right angle at ), which contains the angle you want.
Revise: Key termsPractise: 3D Geometry -
Spot the error
A pupil finds the volume of a cone with radius and height as . What is wrong?
A cone has volume , so the factor is missing. The volume is .
Revise: Key termsPractise: 3D Geometry -
True or false
True or false: the angle of depression from the top of a cliff to a boat equals the angle of elevation from the boat to the top of the cliff.
True. The two angles are alternate angles between parallel lines (the horizontal at the top and the horizontal at the boat), so they are equal.
Revise: Key termsPractise: 3D Geometry -
Which formula?
and is acute. Which identity helps, and what is ?
, so and (positive because is acute).
Revise: Key termsPractise: Radians and trigonometric equations -
Which method?
Which definition lets you simplify , and what does it simplify to?
Use : .
Revise: Key termsPractise: Radians and trigonometric equations -
Criteria
Does the equation have any solutions? How can you tell?
No. The value of always lies between and , so is impossible.
Revise: Key termsPractise: Radians and trigonometric equations -
Which method?
The equation , for with in radians, has no exact method of solution. How do you solve it?
Graph and over the interval and read off the -coordinates of every point where they cross.
Revise: FormulasPractise: Radians and trigonometric equations -
Which method?
The vectors and are perpendicular. Which condition do you use, and what is ?
Their scalar product is zero: , so .
Revise: Key termsPractise: Dot product and angles -
Interpret
Two non-zero vectors satisfy . What is the angle between them, and what does that tell you about the vectors?
, so . The vectors point in the same direction (one is a positive multiple of the other).
Revise: FormulasPractise: Dot product and angles -
Spot the error
For two vectors with , and , a pupil states . What is wrong?
The scalar product must be divided by : , so .
Revise: FormulasPractise: Dot product and angles -
Which formula?
Which formula gives the vector from to , and what is it?
(end minus start) .
Revise: Key termsPractise: Vector basics -
Which method?
The vectors and are parallel. Which method finds , and what is ?
Parallel vectors are scalar multiples. , so .
Revise: Key termsPractise: Vector basics -
Spot the error
A pupil finds the magnitude of as . What is wrong?
The components are squared first, and , not . So the magnitude is .
Revise: Key termsPractise: Vector basics -
First step
To write the vector equation of the line through and , what is the first step, and what does it give?
Find a direction vector: . Then .
Revise: Key termsPractise: Vector equations of lines -
Criteria
Does the point lie on the line ? How do you decide?
No. The -coordinate gives , so . Then , which is not . The parameter values must agree for every coordinate.
Revise: Key termsPractise: Vector equations of lines -
Which method?
How do you convert to parametric form, and what is the result?
Write each coordinate separately in terms of : , , .
Revise: Key termsPractise: Vector equations of lines -
True or false
In triangle , and . Using and , true or false: side is twice side .
False. By the sine rule , so . Doubling an angle does not double the opposite side.
-
True or false
In triangle , side is opposite angle . True or false: if , then angle is obtuse.
True. The cosine rule gives . For to exceed , the term must be positive, so and is obtuse.
Revise: Key termsPractise: Cosine Rule -
True or false
True or false: a triangle can have two sides of lengths and and an area of .
False. The area is , and , so the area is at most . It reaches only when .
Revise: FormulasPractise: Area of a Triangle -
Which formula?
Which dot product gives , the square of the magnitude of a vector ?
. The angle between and itself is and , so .
Revise: FormulasPractise: Dot product and angles -
True or false
True or false: for any two vectors, .
False. For and , , but . Equality holds only when the vectors point in the same direction, or one of them is the zero vector.
Revise: FormulasPractise: Vector basics -
True or false
True or false: and describe the same line.
True. The direction is parallel to , and lies on the first line: gives . A line has many vector equations.
Revise: Key termsPractise: Vector equations of lines
Other AI HL areas
Quick questions
Are the IB Maths AI HL geometry and trigonometry flashcards free?
Yes. Every flashcard on IB Maths Help is free to use, with no account needed. If you log in, your answers are saved to your account, so you can pick up where you left off and skip the cards you already know.
How do the flashcards work?
Read the question, click the card to reveal the answer, then say whether you got it right. Cards you miss come round again until you have them all.
What kinds of card are there?
Definitions, criteria (what must be true for something to apply), true or false, identify, which formula, which method, spot the error, interpret and first step. They test one quick idea at a time and need no calculator.
Which topics are in the AI HL geometry and trigonometry flashcards?
This deck covers Dot product and angles, Vector basics, Graph theory basics, Minimum spanning tree, Traversals and circuits, Radians, arcs and sectors, Matrix transformations, Composite transformations, Trigonometric Models, Voronoi Applications, Voronoi Construction, Sine Rule, Cosine Rule, Area of a Triangle, 3D Geometry, Radians and trigonometric equations, Vector equations of lines. The other AI HL areas each have their own deck.
How are flashcards different from practice questions?
Flashcards test one quick idea, such as a definition, a formula or which method to choose. Practice questions are full IB-style questions with worked solutions. Each flashcard links to the matching practice questions.